is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Stain a Deck with a Roller
1 Deck stain
2 Roller frame
3 Roller cover
4 Paint tray
5 Paintbrush
6 Paint stirrer
7 Drop cloth
8 Painters tape
9 Safety goggles
10 Respirator mask.

How to Stain a Deck with a Roller

Deck Staining Made Easy: Learn How to Use a Roller for a Flawless Finish

Staining a deck with a roller is a great way to give your deck a new look and protect it from the elements. It's a relatively easy DIY project that can be completed in a weekend. In this step-by-step guide, we'll show you how to stain a deck with a roller.

Step 1: Clean the Deck
Before you begin staining, you need to make sure your deck is clean. Sweep away any debris, and use a power washer or deck cleaner to remove any dirt, grime, or mildew. Allow the deck to dry completely before moving on to the next step.

Step 2: Apply the Stain
Choose a high-quality deck stain that is appropriate for your deck's wood type and the climate in your area. Stir the stain thoroughly before you begin, and pour it into a paint tray. Use a roller with a long handle to apply the stain to the deck boards. Start at one end of the deck and work your way across, applying the stain in long, even strokes. Be sure to overlap each stroke slightly to ensure even coverage.

Step 3: Work in Sections
To prevent the stain from drying too quickly, work in small sections of about two or three boards at a time. Apply the stain to the boards in each section, then move on to the next section. This will help you avoid lap marks and ensure that the stain is applied evenly.

Step 4: Use a Brush for Edges and Corners
A roller is great for applying stain to large, flat surfaces, but it can be difficult to use in tight spaces like corners and edges. Use a brush to apply stain to these areas, being careful not to leave any drips or runs.

Step 5: Allow the Stain to Dry
After you have applied the stain to the entire deck, allow it to dry completely. This can take anywhere from a few hours to a full day, depending on the climate and the type of stain you used. Be sure to follow the manufacturer's instructions for drying time.

Step 6: Apply a Second Coat (Optional)
If you want a deeper color or more protection, you can apply a second coat of stain once the first coat has dried. Follow the same steps as before, working in small sections and using a brush for edges and corners.

Staining a deck with a roller is a great way to give your deck a new look and protect it from the elements. With these simple steps, you can complete the project in a weekend and enjoy your newly stained deck for years to come.